Never assume a new gasket was used:)
Those exhaust nuts need to be retorqued. If not you will soon be pulling the exhaust, redoing the mating surfaces and putting a new gasket in there.
That should be corrected because if the gasket burns out then you have a loose exhaust etc.. Very unpleasant.
Seeking Advice on Diagnosing Oil Consumption
Moderators: sky's the limit, sepia, Sulako, North Shore
-
OntheNumbers
- Rank 2
- Posts: 96
- Joined: Wed Feb 04, 2009 9:04 am
Re: Seeking Advice on Diagnosing Oil Consumption
Cripes! Thanks, the plane is grounded until that's looked at!cgzro wrote:Never assume a new gasket was used:)
Those exhaust nuts need to be retorqued. If not you will soon be pulling the exhaust, redoing the mating surfaces and putting a new gasket in there.
That should be corrected because if the gasket burns out then you have a loose exhaust etc.. Very unpleasant.
