Calgary / Springbank Tower Positions!!
Moderators: Sulako, North Shore, ahramin, sky's the limit, sepia
-
- Rank 0
- Posts: 3
- Joined: Tue Dec 10, 2019 12:04 pm
Calgary / Springbank Tower Positions!!
Hi,
What are the chances of being sent to Calgary or Springbank towers after finishing phase one training? Are these places in high demand like Victoria or not so much?
Thanks.10.0.0.0.1 192.168.1.254 hotmail.com
What are the chances of being sent to Calgary or Springbank towers after finishing phase one training? Are these places in high demand like Victoria or not so much?
Thanks.10.0.0.0.1 192.168.1.254 hotmail.com
|
Re: Calgary / Springbank Tower Positions!!
Can't speak to YBW, but YYC has had 5 ab-initios in the last 10 years. So it's rare, but does happen. All 5 qualified, but Nav Canada won't put you in a position to fail in your initial post. If you don't get the location you want, go qualify in the assigned post. Then you can bid to your desired site with full salary and return rights.
|
-
- Rank 0
- Posts: 1
- Joined: Sun Jan 10, 2021 10:43 pm
Re: Calgary / Springbank Tower Positions!!
Gordon is responsible for two other sites: Yellowknife Tower and Yellowknife Flight Service Station. He calls Yellowknife home, and describes the commute to southern Alberta as painless: it’s a two-hour flight to Calgary International Airport and then a half-hour drive to the Springbank Tower.
|
-
- Rank 3
- Posts: 119
- Joined: Sun May 04, 2014 2:19 pm
- Location: YUL
Re: Calgary / Springbank Tower Positions!!
What does that have to do with the OP's question?vicycleone wrote: ↑Mon Jan 11, 2021 12:08 am Gordon is responsible for two other sites: Yellowknife Tower and Yellowknife Flight Service Station. He calls Yellowknife home, and describes the commute to southern Alberta as painless: it’s a two-hour flight to Calgary International Airport and then a half-hour drive to the Springbank Tower.
|
us Air Traffic Controllers have a good record ! We haven't left one up there yet !
-
- Rank 1
- Posts: 25
- Joined: Wed Oct 09, 2013 10:47 pm