Bearskin Crash — FEB 25, 2020 — Dryden, ON

Topics related to accidents, incidents & over due aircraft should be placed in this forum.

Moderators: North Shore, sky's the limit, sepia, Sulako, lilfssister

Dronepiper
Rank 4
Rank 4
Posts: 267
Joined: Thu Jan 02, 2020 10:22 pm

Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by Dronepiper »

:?: https://www.tbnewswatch.com/local-news/ ... en-2116317

Any word on who was involved? Skycare? Bearskin?
---------- ADS -----------
 
Last edited by Dronepiper on Mon Feb 24, 2020 10:02 pm, edited 1 time in total.
opinionated
Rank 0
Rank 0
Posts: 3
Joined: Wed Apr 09, 2014 3:15 pm

Re: Plane Crash Dryden, ON — FEB 25, 2020

Post by opinionated »

---------- ADS -----------
 
flyinhigh
Rank 11
Rank 11
Posts: 3114
Joined: Mon Apr 19, 2004 7:42 pm
Location: my couch

Re: Plane Crash Dryden, ON — FEB 25, 2020

Post by flyinhigh »

One pax is in hospital.
A good family friend was on that aircraft and as can imagine is quite shaken up. Sounds like they hit a snow bank on departure.
---------- ADS -----------
 
mmm..bacon
Rank 5
Rank 5
Posts: 383
Joined: Sat Aug 30, 2014 7:19 pm

Re: Plane Crash Dryden, ON — FEB 25, 2020

Post by mmm..bacon »

flyinhigh wrote: Mon Feb 24, 2020 8:41 pm Sounds like they hit a snow bank on departure.
So they ran it off the side or the end of the runway, then?
---------- ADS -----------
 
Everything has an end, except a sausage, which has two!
bobcaygeon
Rank 7
Rank 7
Posts: 707
Joined: Sat Mar 12, 2005 8:03 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by bobcaygeon »

Off the side, barely outside the lights, couldn’t have been going very fast. “Crash” is a big overstatement. They towed it out of the snowbank once they had a towbar I’ve been told. Runway was closed for 3 hrs.

Passenger released from hospital a couple hrs later, got a few stitches I heard.
---------- ADS -----------
 
opinionated
Rank 0
Rank 0
Posts: 3
Joined: Wed Apr 09, 2014 3:15 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by opinionated »

"the plane was travelling down the runway when the pilot reported he had 'no steering and no brakes.' [...] the plane then skidded into a snowbank and the propeller pierced through the plane’s fuselage"

https://www.country1053.ca/2020/02/24/p ... cNJn4ldMxA
---------- ADS -----------
 
altiplano
Top Poster
Top Poster
Posts: 5680
Joined: Sat Jan 22, 2005 2:24 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by altiplano »

NWS problem on a Metro took them off the side?
---------- ADS -----------
 
digits_
Top Poster
Top Poster
Posts: 6755
Joined: Mon Feb 14, 2011 2:26 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by digits_ »

That wouldn't explain the lack of brakes though. Realistically the nosewheel steering system and brake system is completely separate, although stranger things have happened.

Then again, just the brakes wouldn't be enough to overwrite a faulty nose wheel steering, which might give the illusion of non operational brakes. And if things happen that quickly, you might not have enough time to play with reverse either.
---------- ADS -----------
 
As an AvCanada discussion grows longer:
-the probability of 'entitlement' being mentioned, approaches 1
-one will be accused of using bad airmanship
Illya Kuryakin
Rank (9)
Rank (9)
Posts: 1311
Joined: Mon Mar 24, 2014 11:14 pm
Location: The Gulag Archipelago

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by Illya Kuryakin »

digits_ wrote: Tue Feb 25, 2020 8:50 am That wouldn't explain the lack of brakes though. Realistically the nosewheel steering system and brake system is completely separate, although stranger things have happened.

Then again, just the brakes wouldn't be enough to overwrite a faulty nose wheel steering, which might give the illusion of non operational brakes. And if things happen that quickly, you might not have enough time to play with reverse either.
Been a while but I seem remember the nose wheel goes “shopping cart” if it dies? Brakes and throttle should have kept her straight. As I say, it’s been a while. Bearskin have tillers, or rudder steering?
The chap who was hospitalized had cuts on his hands from the prop. He’s a lucky guy. Did the gear collapse? Can’t see the snow bank taking out a prop. Could have been far worse.
Cheers
Illya
---------- ADS -----------
 
Wish I didn't know now, what I didn't know then.
ogc
Rank 5
Rank 5
Posts: 317
Joined: Tue Sep 15, 2009 11:52 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by ogc »

Illya Kuryakin wrote: Wed Mar 04, 2020 6:33 pm
Been a while but I seem remember the nose wheel goes “shopping cart” if it dies? Brakes and throttle should have kept her straight. As I say, it’s been a while. Bearskin have tillers, or rudder steering?
The chap who was hospitalized had cuts on his hands from the prop. He’s a lucky guy. Did the gear collapse? Can’t see the snow bank taking out a prop. Could have been far worse.
Cheers
Illya
Yes the nosewheel goes shopping cart. You can easily steer and park the plane with differential brakes and power.

Bearskins planes are likely rudder steering. I think there are a couple metros that came with a tiller but it was a very very rare option.

As for the prop, I'm pretty sure bearskin and perimeter both use composite props so shatter instead of bend.
---------- ADS -----------
 
digits_
Top Poster
Top Poster
Posts: 6755
Joined: Mon Feb 14, 2011 2:26 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by digits_ »

Illya Kuryakin wrote: Wed Mar 04, 2020 6:33 pm
digits_ wrote: Tue Feb 25, 2020 8:50 am That wouldn't explain the lack of brakes though. Realistically the nosewheel steering system and brake system is completely separate, although stranger things have happened.

Then again, just the brakes wouldn't be enough to overwrite a faulty nose wheel steering, which might give the illusion of non operational brakes. And if things happen that quickly, you might not have enough time to play with reverse either.
Been a while but I seem remember the nose wheel goes “shopping cart” if it dies? Brakes and throttle should have kept her straight. As I say, it’s been a while. Bearskin have tillers, or rudder steering?
The chap who was hospitalized had cuts on his hands from the prop. He’s a lucky guy. Did the gear collapse? Can’t see the snow bank taking out a prop. Could have been far worse.
Cheers
Illya
There are different fail modes. The most dangerous one and most common one -although still rare-, is where one of the valves fail. You get in a situation where the nosewheel steering has pressure but is uncontrolled, so the wheel takes a random position and stays there.

I believe Bearskin has rudder steering.

I don't know any further details about the incident.
---------- ADS -----------
 
As an AvCanada discussion grows longer:
-the probability of 'entitlement' being mentioned, approaches 1
-one will be accused of using bad airmanship
sstaurus
Rank 7
Rank 7
Posts: 733
Joined: Wed Sep 12, 2007 4:32 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by sstaurus »

digits_ wrote: Wed Mar 04, 2020 7:28 pm
Illya Kuryakin wrote: Wed Mar 04, 2020 6:33 pm
digits_ wrote: Tue Feb 25, 2020 8:50 am That wouldn't explain the lack of brakes though. Realistically the nosewheel steering system and brake system is completely separate, although stranger things have happened.

Then again, just the brakes wouldn't be enough to overwrite a faulty nose wheel steering, which might give the illusion of non operational brakes. And if things happen that quickly, you might not have enough time to play with reverse either.
Been a while but I seem remember the nose wheel goes “shopping cart” if it dies? Brakes and throttle should have kept her straight. As I say, it’s been a while. Bearskin have tillers, or rudder steering?
The chap who was hospitalized had cuts on his hands from the prop. He’s a lucky guy. Did the gear collapse? Can’t see the snow bank taking out a prop. Could have been far worse.
Cheers
Illya
There are different fail modes. The most dangerous one and most common one -although still rare-, is where one of the valves fail. You get in a situation where the nosewheel steering has pressure but is uncontrolled, so the wheel takes a random position and stays there.
That was my first thought too.. This failure only occurs on the Metro III as far as I know, I don’t know which reg was involved..
---------- ADS -----------
 
Maynard
Rank 6
Rank 6
Posts: 483
Joined: Wed Sep 24, 2008 8:33 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by Maynard »

Illya Kuryakin wrote: Wed Mar 04, 2020 6:33 pm
digits_ wrote: Tue Feb 25, 2020 8:50 am That wouldn't explain the lack of brakes though. Realistically the nosewheel steering system and brake system is completely separate, although stranger things have happened.

Then again, just the brakes wouldn't be enough to overwrite a faulty nose wheel steering, which might give the illusion of non operational brakes. And if things happen that quickly, you might not have enough time to play with reverse either.
Been a while but I seem remember the nose wheel goes “shopping cart” if it dies? Brakes and throttle should have kept her straight. As I say, it’s been a while. Bearskin have tillers, or rudder steering?
The chap who was hospitalized had cuts on his hands from the prop. He’s a lucky guy. Did the gear collapse? Can’t see the snow bank taking out a prop. Could have been far worse.
Cheers
Illya
With NWS off, it goes shopping cart. No Tiller, rudder input. It can fail (flashing green NOSE STEERING on the III) which is an un-commanded fault (NWS is doing something the rudder input didn't command) On takeoff, when speed levers go high, it disconnects the NWS. There's a thumb button on the power levers to engage the nose steering for the takeoff roll, to be disconnected by 60 knots (I always did 40 since there's rudder authority and if it did @#$! off, 40 was slow enough to keep control. Above 60 with it engaged is very sensitive and not ideal. The gear didn't collapse, the props only have about 8-10" clearance and the MT wooden props disintegrate. This was a Metro 23, so the Amber Nose Steer Fail would illuminate if it failed which would be corrected by disengaging it. That's all I got.
---------- ADS -----------
 
I guess I should write something here.
pelmet
Top Poster
Top Poster
Posts: 7713
Joined: Tue Jun 14, 2005 2:48 pm

Re: Plane Crash Dryden, ON — FEB 25, 2020

Post by pelmet »

flyinhigh wrote: Mon Feb 24, 2020 8:41 pm One pax is in hospital.
A good family friend was on that aircraft and as can imagine is quite shaken up. Sounds like they hit a snow bank on departure.
C-GJVB, a Fairchild SA227-DC operated by Perimeter Aviation as flight Bearskin Airlines 344, was
conducting a VFR flight from Dryden Regional (CYHD), ON to Sioux Lookout (CYXL), ON with 2
crew members and 6 passengers on board. As C-GJVB started the takeoff roll on Runway 12, the
aircraft directional control was lost and the aircraft exited the right side of the runway. The
propellers subsequently contacted a snow bank and broke apart. Parts of the broken propellers
penetrated the fuselage, injuring 1 passenger. The aircraft was substantially damaged.


Once again, why I prefer not to sit in a row near the propeller.
---------- ADS -----------
 
co-joe
Rank 11
Rank 11
Posts: 4722
Joined: Mon Feb 16, 2004 2:33 am
Location: YYC 230 degree radial at about 10 DME

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by co-joe »

bobcaygeon wrote: Tue Feb 25, 2020 5:05 am Off the side, barely outside the lights, couldn’t have been going very fast. “Crash” is a big overstatement. They towed it out of the snowbank once they had a towbar I’ve been told. Runway was closed for 3 hrs.

Passenger released from hospital a couple hrs later, got a few stitches I heard.
Crash is not the correct term, but since someone was injured I believe the term "accident" applies.
An aviation accident is an occurrence resulting directly from the operation of an aircraft in which

a person is killed or sustains a serious injury as a result of
being on board the aircraft,
coming into direct contact with any part of the aircraft, including parts that have become detached from the aircraft, or...
---------- ADS -----------
 
flyinhigh
Rank 11
Rank 11
Posts: 3114
Joined: Mon Apr 19, 2004 7:42 pm
Location: my couch

Re: Plane Crash Dryden, ON — FEB 25, 2020

Post by flyinhigh »

Thanks Pelmet.
After this incident I subscribed to the CADOR so I could keep up on the most recent info and pass it on to our friends.
pelmet wrote: Sat Mar 28, 2020 8:27 pm
flyinhigh wrote: Mon Feb 24, 2020 8:41 pm One pax is in hospital.
A good family friend was on that aircraft and as can imagine is quite shaken up. Sounds like they hit a snow bank on departure.
C-GJVB, a Fairchild SA227-DC operated by Perimeter Aviation as flight Bearskin Airlines 344, was
conducting a VFR flight from Dryden Regional (CYHD), ON to Sioux Lookout (CYXL), ON with 2
crew members and 6 passengers on board. As C-GJVB started the takeoff roll on Runway 12, the
aircraft directional control was lost and the aircraft exited the right side of the runway. The
propellers subsequently contacted a snow bank and broke apart. Parts of the broken propellers
penetrated the fuselage, injuring 1 passenger. The aircraft was substantially damaged.


Once again, why I prefer not to sit in a row near the propeller.
---------- ADS -----------
 
ozone
Rank 3
Rank 3
Posts: 142
Joined: Tue Jan 04, 2005 7:01 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by ozone »

Not much left of the composite MT prop

https://www.salvagesale.com/for-sale/Ai ... pnLink=yes
---------- ADS -----------
 
flyinhigh
Rank 11
Rank 11
Posts: 3114
Joined: Mon Apr 19, 2004 7:42 pm
Location: my couch

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by flyinhigh »

CADOR says it was not mechanical.
---------- ADS -----------
 
J31
Rank (9)
Rank (9)
Posts: 1248
Joined: Thu Feb 26, 2004 7:21 am

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by J31 »

No problem with the nose wheel steering.

Right engine start locks not disengaged. :oops: Then no one looking at the torque as the power was pushed up for takeoff. https://www.tsb.gc.ca/eng/rapports-repo ... c0016.html

"The engaged start locks prevented the right propeller from producing the required thrust, which resulted in a significant thrust differential. With less thrust being generated by the right engine, the aircraft experienced a loss of directional control and exited the runway."
---------- ADS -----------
 
Dronepiper
Rank 4
Rank 4
Posts: 267
Joined: Thu Jan 02, 2020 10:22 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by Dronepiper »

J31 wrote: Fri Apr 30, 2021 8:35 pm No problem with the nose wheel steering.

Right engine start locks not disengaged. :oops: Then no one looking at the torque as the power was pushed up for takeoff. https://www.tsb.gc.ca/eng/rapports-repo ... c0016.html

"The engaged start locks prevented the right propeller from producing the required thrust, which resulted in a significant thrust differential. With less thrust being generated by the right engine, the aircraft experienced a loss of directional control and exited the runway."
---------- ADS -----------
 
Last edited by Dronepiper on Sat May 01, 2021 11:29 am, edited 1 time in total.
User avatar
BTD
Rank (9)
Rank (9)
Posts: 1576
Joined: Wed Mar 23, 2005 8:53 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by BTD »

Dronepiper wrote: Sat May 01, 2021 10:39 am
J31 wrote: Fri Apr 30, 2021 8:35 pm No problem with the nose wheel steering.

Right engine start locks not disengaged. :oops: Then no one looking at the torque as the power was pushed up for takeoff. https://www.tsb.gc.ca/eng/rapports-repo ... c0016.html

"The engaged start locks prevented the right propeller from producing the required thrust, which resulted in a significant thrust differential. With less thrust being generated by the right engine, the aircraft experienced a loss of directional control and exited the runway."
Wow! I was not expecting this. That was a very senior and experienced Captain who was PM. Yes the FO was somewhat new, but the SOPs at Bearskin (As of 2019) states that the captain will apply the power and keep his hands on the power (similar to most 705 ops). It’s very easy to tell if the start locks are not dis-engaged by watching the gauges as you apply power. It will become obvious in about 1 second. There would be no difference in sound, so it would only be gauge indications.
I made this same mistake on a metro around a decade ago. Although in that case I did complete the action for the start lock disengagement but one of them didn’t come off the lock. (Perhaps I didn’t go as far into reverse as I thought). Didn’t notice at all on the taxi. I believe it was the FO flying who was new at the time. As soon as we applied power it veered and I rejected immediately. I was able to tell what the problem was very quickly so we taxied off and I moved it off the lock.

The metro is squirrelly to begin with and it doesn’t take long to veer. Maybe I just got lucky. Bummer though.
---------- ADS -----------
 
pelmet
Top Poster
Top Poster
Posts: 7713
Joined: Tue Jun 14, 2005 2:48 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by pelmet »

First day of line training for the F/O. The captain had loads of experience on type but unfortunately didn't seem to be performing particularly well. Anyone can miss a checklist item but it is too bad that he didn't check the torques as the power was brought up. Improper blade angles can send a multi-engine aircraft off the runway very quickly(if they are asymmetric).

Torques are often your best way of discovering this. One aircraft I flew had lights to let you know when you could go into reverse, but they didn't always illuminate due to unreliable contacts. Checking for even torques could confirm if the blades had hung up or it was a light problem.

The checklist seems strange as well. The response to 'Start Locks' is.........'Clear, Clean, Wing Cap On'. That means three things have been checked but none of them have anything to do with start locks.Released might be a better response with the other response something like 'Props and Wings'.
---------- ADS -----------
 
boeingboy
Rank (9)
Rank (9)
Posts: 1620
Joined: Wed Mar 03, 2004 2:57 pm
Location: West coast

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by boeingboy »

pelmet wrote: Sun Jul 25, 2021 3:25 pm First day of line training for the F/O. The captain had loads of experience on type but unfortunately didn't seem to be performing particularly well. Anyone can miss a checklist item but it is too bad that he didn't check the torques as the power was brought up. Improper blade angles can send a multi-engine aircraft off the runway very quickly(if they are asymmetric).

Torques are often your best way of discovering this. One aircraft I flew had lights to let you know when you could go into reverse, but they didn't always illuminate due to unreliable contacts. Checking for even torques could confirm if the blades had hung up or it was a light problem.

The checklist seems strange as well. The response to 'Start Locks' is.........'Clear, Clean, Wing Cap On'. That means three things have been checked but none of them have anything to do with start locks.Released might be a better response with the other response something like 'Props and Wings'.
I disagree with pretty much everything you just said.....once again Pelmet comes to the rescue - going on about stuff he knows nothing about.

The captain didn't do his job. Period. He was supposed to watch the torque as they applied initial power for takeoff and obviously didn't do that. You can make all the checklists in the world and still screw the pooch. The checklist item may seem odd to those on the outside but actually makes sense. It's a command - "I want to release the locks" your checking that there is nothing in front of you before you pull reverse power, checking the wings are free and the fuel cap is on - all before the locks are released. In other words after the response - you release the locks....it's not a check for the locks. You do them all as your looking out the window on the respective side.

Anyone with an ounce of common sense will know if their start locks did not release. First - any time the power lever is advanced that engine still on the locks will accelerate a LOT faster than the one that has been released, and second it will pull when it taxi's. Can't really blame the FO as he had never flown it before - but someone should have wondered why they have a whole lot of rudder (or joystick, or tiller) while they taxi a metro.
---------- ADS -----------
 
pelmet
Top Poster
Top Poster
Posts: 7713
Joined: Tue Jun 14, 2005 2:48 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by pelmet »

pelmet wrote: Sun Jul 25, 2021 3:25 pm The captain had loads of experience on type but unfortunately didn't seem to be performing particularly well. Anyone can miss a checklist item but it is too bad that he didn't check the torques as the power was brought up. Improper blade angles can send a multi-engine aircraft off the runway very quickly(if they are asymmetric).

Torques are often your best way of discovering this. One aircraft I flew had lights to let you know when you could go into reverse, but they didn't always illuminate due to unreliable contacts. Checking for even torques could confirm if the blades had hung up or it was a light problem.

The checklist seems strange as well. The response to 'Start Locks' is.........'Clear, Clean, Wing Cap On'. That means three things have been checked but none of them have anything to do with start locks.Released might be a better response with the other response something like 'Props and Wings'.
boeingboy wrote: Sun Jul 25, 2021 5:37 pm I disagree with pretty much everything you just said.....once again Pelmet comes to the rescue - going on about stuff he knows nothing about.
Perhaps...Lets see what I said and what you might disagree with(and you said it was pretty much everything). I said....
pelmet wrote: Sun Jul 25, 2021 3:25 pm The captain had loads of experience on type but unfortunately didn't seem to be performing particularly well. Anyone can miss a checklist item but it is too bad that he didn't check the torques as the power was brought up.
You said.....
boeingboy wrote: Sun Jul 25, 2021 5:37 pm The captain didn't do his job. Period. He was supposed to watch the torque as they applied initial power for takeoff and obviously didn't do that.
I said......
pelmet wrote: Sun Jul 25, 2021 3:25 pm First day of line training for the F/O.
You said....
boeingboy wrote: Sun Jul 25, 2021 5:37 pm Can't really blame the FO as he had never flown it before
I said.....
pelmet wrote: Sun Jul 25, 2021 3:25 pm Improper blade angles can send a multi-engine aircraft off the runway very quickly(if they are asymmetric). Torques are often your best way of discovering this. Checking for even torques could confirm if the blades had hung up or it was a light problem.
You said......
boeingboy wrote: Sun Jul 25, 2021 5:37 pm He was supposed to watch the torque as they applied initial power for takeoff and obviously didn't do that.
Sounds like you actually agree with almost everything I said. Perhaps I know what I am talking about

I would add for the F/O that even if it was his first day of line training and therefore extremely inexperienced, should at least know to have all checklist items responded to properly and the appropriate checklists completed.

The one actual single thing that you disagree with me on is the checklist. I will discuss that further below.
---------- ADS -----------
 
Last edited by pelmet on Sat Jul 31, 2021 5:15 am, edited 4 times in total.
pelmet
Top Poster
Top Poster
Posts: 7713
Joined: Tue Jun 14, 2005 2:48 pm

Re: Bearskin Crash — FEB 25, 2020 — Dryden, ON

Post by pelmet »

boeingboy wrote: Sun Jul 25, 2021 5:37 pm
pelmet wrote: Sun Jul 25, 2021 3:25 pm

The checklist seems strange as well. The response to 'Start Locks' is.........'Clear, Clean, Wing Cap On'. That means three things have been checked but none of them have anything to do with start locks.
The checklist item may seem odd to those on the outside but actually makes sense. It's a command - "I want to release the locks" your checking that there is nothing in front of you before you pull reverse power, checking the wings are free and the fuel cap is on - all before the locks are released. In other words after the response - you release the locks....it's not a check for the locks. You do them all as your looking out the window on the respective side.
As for the checklist, does checking that the fuel caps are on have anything to do with releasing the start locks. Does checking that the wings are free from contamination have anything to do with releasing the start locks.
---------- ADS -----------
 
Post Reply

Return to “Accidents, Incidents & Overdue Aircraft”