Maintenance Relase

This forum has been developed to discuss maintenance topics in Canada.

Moderators: sky's the limit, sepia, Sulako, North Shore

Post Reply
Abdullah_og
Rank 0
Rank 0
Posts: 1
Joined: Fri Mar 10, 2023 11:39 am

Maintenance Relase

Post by Abdullah_og »

Hello,
I'm a student currently in college to become an AME, and it seems every prof has their own way of doing releases. I've got the basics down, but I've got 2 specific questions that I was hoping to get some help with.

1. When writing a maintenance release with respect to a system inspection, do you have to list the results of the inspection, or is it sufficient to state that the inspection was completed and passed /failed? i.e., if you find a fault do you need to list it in the maintenance release/ logbook entry?

2. If one must fabricate a part, i.e. a hydraulic line, do you have to write an ARC for it? Or is it sufficient to state that the line was fabricated in accordance with the applicable technical data? (M1)

Many thanks for the help!
---------- ADS -----------
 
Post Reply

Return to “Maintenance”