FAA oral test

This forum has been developed to discuss maintenance topics in Canada.

Moderators: sky's the limit, sepia, Sulako, North Shore

Post Reply
wstone
Rank 0
Rank 0
Posts: 4
Joined: Fri Mar 30, 2007 7:51 pm

FAA oral test

Post by wstone »

I had already finished 3 acknowledge test for FAA license. The next step will be oral test, but it looks very tough, Is it right? Anybody has experience about this please giving some suggestion. Thanks a lot.

By the way, I need some recommendation for examiner most close to monteal area. Thanks.
---------- ADS -----------
 
29 ford
Rank 1
Rank 1
Posts: 34
Joined: Sat Mar 11, 2006 6:29 pm

Post by 29 ford »

When I did mine 5 years ago it was just a repeat of the written exams. I had to bring my books with me and the examiner read right from the books. The practical is a little harder you have to fill out all the paper work as if you were going to install an STC on an aircraft including 8130 form, logbooks and amend the weight and balance. After that it was basics like soldering wires in a cannon plug, checking for contaminated fuel, checking a fuel shut-off valve, checking p/n's in the IPC. After that he gets a days work out of you for the 200 or 300 bucks you gave him. Hope this helps.
---------- ADS -----------
 
29 ford
Rank 1
Rank 1
Posts: 34
Joined: Sat Mar 11, 2006 6:29 pm

Post by 29 ford »

Don't know the closest DME (Designated maintenance examiner) to Montreal.
I did mine at Long Island, New York.
---------- ADS -----------
 
wstone
Rank 0
Rank 0
Posts: 4
Joined: Fri Mar 30, 2007 7:51 pm

Post by wstone »

Thanks a lot 29ford.
---------- ADS -----------
 
Post Reply

Return to “Maintenance”