Welded Repairs

[Injun]

Hi Guys,

I have a question regarding welded repairs. I have an M1/M2 license and was wondering if I could certify a welded, structural repair carried out on a PRIVATE aircraft performed by a certified aircraft welder?

Does anoyone know the ins and outs of this type of work outside of an AMO?

Any help or references appreciated,

Thanks, Injun.

[hangarline]

Here is the reference you may be looking for;

Specialized Maintenance

571.04 No person shall perform the specialized maintenance set out in Schedule II to this Subpart on an aeronautical product other than an aircraft operated under a special certificate of airworthiness in the owner-maintenance or amateur-built classification, except in accordance with
(amended 2002/03/01; previous version)

(a) a maintenance policy manual (MPM) established by the holder of an approved maintenance organization (AMO) certificate issued pursuant to Section 573.02 with a rating of a category appropriate to the work to be performed; or

(b) a foreign document equivalent to an MPM established by a maintenance organization approved under the laws of a state that is party to an agreement with Canada, and the agreement provides for recognition of the work to be performed.

(5) No person shall sign a maintenance release in respect of specialized maintenance unless the requirements of section 571.04 have been met.

http://www.tc.gc.ca/civilaviation/regse ... a57102.htm (Schedule II)

Hope this helps.